futures_util/async_await/select_mod.rs
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338
//! The `select` macro.
macro_rules! document_select_macro {
// This branch is required for `futures 0.3.1`, from before select_biased was introduced
($select:item) => {
#[allow(clippy::too_long_first_doc_paragraph)]
/// Polls multiple futures and streams simultaneously, executing the branch
/// for the future that finishes first. If multiple futures are ready,
/// one will be pseudo-randomly selected at runtime. Futures directly
/// passed to `select!` must be `Unpin` and implement `FusedFuture`.
///
/// If an expression which yields a `Future` is passed to `select!`
/// (e.g. an `async fn` call) instead of a `Future` by name the `Unpin`
/// requirement is relaxed, since the macro will pin the resulting `Future`
/// on the stack. However the `Future` returned by the expression must
/// still implement `FusedFuture`.
///
/// Futures and streams which are not already fused can be fused using the
/// `.fuse()` method. Note, though, that fusing a future or stream directly
/// in the call to `select!` will not be enough to prevent it from being
/// polled after completion if the `select!` call is in a loop, so when
/// `select!`ing in a loop, users should take care to `fuse()` outside of
/// the loop.
///
/// `select!` can be used as an expression and will return the return
/// value of the selected branch. For this reason the return type of every
/// branch in a `select!` must be the same.
///
/// This macro is only usable inside of async functions, closures, and blocks.
/// It is also gated behind the `async-await` feature of this library, which is
/// activated by default.
///
/// # Examples
///
/// ```
/// # futures::executor::block_on(async {
/// use futures::future;
/// use futures::select;
/// let mut a = future::ready(4);
/// let mut b = future::pending::<()>();
///
/// let res = select! {
/// a_res = a => a_res + 1,
/// _ = b => 0,
/// };
/// assert_eq!(res, 5);
/// # });
/// ```
///
/// ```
/// # futures::executor::block_on(async {
/// use futures::future;
/// use futures::stream::{self, StreamExt};
/// use futures::select;
/// let mut st = stream::iter(vec![2]).fuse();
/// let mut fut = future::pending::<()>();
///
/// select! {
/// x = st.next() => assert_eq!(Some(2), x),
/// _ = fut => panic!(),
/// };
/// # });
/// ```
///
/// As described earlier, `select` can directly select on expressions
/// which return `Future`s - even if those do not implement `Unpin`:
///
/// ```
/// # futures::executor::block_on(async {
/// use futures::future::FutureExt;
/// use futures::select;
///
/// // Calling the following async fn returns a Future which does not
/// // implement Unpin
/// async fn async_identity_fn(arg: usize) -> usize {
/// arg
/// }
///
/// let res = select! {
/// a_res = async_identity_fn(62).fuse() => a_res + 1,
/// b_res = async_identity_fn(13).fuse() => b_res,
/// };
/// assert!(res == 63 || res == 13);
/// # });
/// ```
///
/// If a similar async function is called outside of `select` to produce
/// a `Future`, the `Future` must be pinned in order to be able to pass
/// it to `select`. This can be achieved via `Box::pin` for pinning a
/// `Future` on the heap or the `pin_mut!` macro for pinning a `Future`
/// on the stack.
///
/// ```
/// # futures::executor::block_on(async {
/// use futures::future::FutureExt;
/// use futures::select;
/// use futures::pin_mut;
///
/// // Calling the following async fn returns a Future which does not
/// // implement Unpin
/// async fn async_identity_fn(arg: usize) -> usize {
/// arg
/// }
///
/// let fut_1 = async_identity_fn(1).fuse();
/// let fut_2 = async_identity_fn(2).fuse();
/// let mut fut_1 = Box::pin(fut_1); // Pins the Future on the heap
/// pin_mut!(fut_2); // Pins the Future on the stack
///
/// let res = select! {
/// a_res = fut_1 => a_res,
/// b_res = fut_2 => b_res,
/// };
/// assert!(res == 1 || res == 2);
/// # });
/// ```
///
/// `select` also accepts a `complete` branch and a `default` branch.
/// `complete` will run if all futures and streams have already been
/// exhausted. `default` will run if no futures or streams are
/// immediately ready. `complete` takes priority over `default` in
/// the case where all futures have completed.
/// A motivating use-case for passing `Future`s by name as well as for
/// `complete` blocks is to call `select!` in a loop, which is
/// demonstrated in the following example:
///
/// ```
/// # futures::executor::block_on(async {
/// use futures::future;
/// use futures::select;
/// let mut a_fut = future::ready(4);
/// let mut b_fut = future::ready(6);
/// let mut total = 0;
///
/// loop {
/// select! {
/// a = a_fut => total += a,
/// b = b_fut => total += b,
/// complete => break,
/// default => panic!(), // never runs (futures run first, then complete)
/// };
/// }
/// assert_eq!(total, 10);
/// # });
/// ```
///
/// Note that the futures that have been matched over can still be mutated
/// from inside the `select!` block's branches. This can be used to implement
/// more complex behavior such as timer resets or writing into the head of
/// a stream.
$select
};
($select:item $select_biased:item) => {
document_select_macro!($select);
#[allow(clippy::too_long_first_doc_paragraph)]
/// Polls multiple futures and streams simultaneously, executing the branch
/// for the future that finishes first. Unlike [`select!`], if multiple futures are ready,
/// one will be selected in order of declaration. Futures directly
/// passed to `select_biased!` must be `Unpin` and implement `FusedFuture`.
///
/// If an expression which yields a `Future` is passed to `select_biased!`
/// (e.g. an `async fn` call) instead of a `Future` by name the `Unpin`
/// requirement is relaxed, since the macro will pin the resulting `Future`
/// on the stack. However the `Future` returned by the expression must
/// still implement `FusedFuture`.
///
/// Futures and streams which are not already fused can be fused using the
/// `.fuse()` method. Note, though, that fusing a future or stream directly
/// in the call to `select_biased!` will not be enough to prevent it from being
/// polled after completion if the `select_biased!` call is in a loop, so when
/// `select_biased!`ing in a loop, users should take care to `fuse()` outside of
/// the loop.
///
/// `select_biased!` can be used as an expression and will return the return
/// value of the selected branch. For this reason the return type of every
/// branch in a `select_biased!` must be the same.
///
/// This macro is only usable inside of async functions, closures, and blocks.
/// It is also gated behind the `async-await` feature of this library, which is
/// activated by default.
///
/// # Examples
///
/// ```
/// # futures::executor::block_on(async {
/// use futures::future;
/// use futures::select_biased;
/// let mut a = future::ready(4);
/// let mut b = future::pending::<()>();
///
/// let res = select_biased! {
/// a_res = a => a_res + 1,
/// _ = b => 0,
/// };
/// assert_eq!(res, 5);
/// # });
/// ```
///
/// ```
/// # futures::executor::block_on(async {
/// use futures::future;
/// use futures::stream::{self, StreamExt};
/// use futures::select_biased;
/// let mut st = stream::iter(vec![2]).fuse();
/// let mut fut = future::pending::<()>();
///
/// select_biased! {
/// x = st.next() => assert_eq!(Some(2), x),
/// _ = fut => panic!(),
/// };
/// # });
/// ```
///
/// As described earlier, `select_biased` can directly select on expressions
/// which return `Future`s - even if those do not implement `Unpin`:
///
/// ```
/// # futures::executor::block_on(async {
/// use futures::future::FutureExt;
/// use futures::select_biased;
///
/// // Calling the following async fn returns a Future which does not
/// // implement Unpin
/// async fn async_identity_fn(arg: usize) -> usize {
/// arg
/// }
///
/// let res = select_biased! {
/// a_res = async_identity_fn(62).fuse() => a_res + 1,
/// b_res = async_identity_fn(13).fuse() => b_res,
/// };
/// assert!(res == 63 || res == 12);
/// # });
/// ```
///
/// If a similar async function is called outside of `select_biased` to produce
/// a `Future`, the `Future` must be pinned in order to be able to pass
/// it to `select_biased`. This can be achieved via `Box::pin` for pinning a
/// `Future` on the heap or the `pin_mut!` macro for pinning a `Future`
/// on the stack.
///
/// ```
/// # futures::executor::block_on(async {
/// use futures::future::FutureExt;
/// use futures::select_biased;
/// use futures::pin_mut;
///
/// // Calling the following async fn returns a Future which does not
/// // implement Unpin
/// async fn async_identity_fn(arg: usize) -> usize {
/// arg
/// }
///
/// let fut_1 = async_identity_fn(1).fuse();
/// let fut_2 = async_identity_fn(2).fuse();
/// let mut fut_1 = Box::pin(fut_1); // Pins the Future on the heap
/// pin_mut!(fut_2); // Pins the Future on the stack
///
/// let res = select_biased! {
/// a_res = fut_1 => a_res,
/// b_res = fut_2 => b_res,
/// };
/// assert!(res == 1 || res == 2);
/// # });
/// ```
///
/// `select_biased` also accepts a `complete` branch and a `default` branch.
/// `complete` will run if all futures and streams have already been
/// exhausted. `default` will run if no futures or streams are
/// immediately ready. `complete` takes priority over `default` in
/// the case where all futures have completed.
/// A motivating use-case for passing `Future`s by name as well as for
/// `complete` blocks is to call `select_biased!` in a loop, which is
/// demonstrated in the following example:
///
/// ```
/// # futures::executor::block_on(async {
/// use futures::future;
/// use futures::select_biased;
/// let mut a_fut = future::ready(4);
/// let mut b_fut = future::ready(6);
/// let mut total = 0;
///
/// loop {
/// select_biased! {
/// a = a_fut => total += a,
/// b = b_fut => total += b,
/// complete => break,
/// default => panic!(), // never runs (futures run first, then complete)
/// };
/// }
/// assert_eq!(total, 10);
/// # });
/// ```
///
/// Note that the futures that have been matched over can still be mutated
/// from inside the `select_biased!` block's branches. This can be used to implement
/// more complex behavior such as timer resets or writing into the head of
/// a stream.
///
/// [`select!`]: macro.select.html
$select_biased
};
}
#[cfg(feature = "std")]
#[allow(unreachable_pub)]
#[doc(hidden)]
pub use futures_macro::select_internal;
#[allow(unreachable_pub)]
#[doc(hidden)]
pub use futures_macro::select_biased_internal;
document_select_macro! {
#[cfg(feature = "std")]
#[macro_export]
macro_rules! select {
($($tokens:tt)*) => {{
use $crate::__private as __futures_crate;
$crate::select_internal! {
$( $tokens )*
}
}}
}
#[macro_export]
macro_rules! select_biased {
($($tokens:tt)*) => {{
use $crate::__private as __futures_crate;
$crate::select_biased_internal! {
$( $tokens )*
}
}}
}
}