virtio_drivers/device/
gpu.rs

//! Driver for VirtIO GPU devices.

use crate::hal::{BufferDirection, Dma, Hal};
use crate::queue::VirtQueue;
use crate::transport::Transport;
use crate::volatile::{volread, ReadOnly, Volatile, WriteOnly};
use crate::{pages, Error, Result, PAGE_SIZE};
use alloc::boxed::Box;
use bitflags::bitflags;
use log::info;
use zerocopy::{AsBytes, FromBytes, FromZeroes};

const QUEUE_SIZE: u16 = 2;
const SUPPORTED_FEATURES: Features = Features::RING_EVENT_IDX.union(Features::RING_INDIRECT_DESC);

/// A virtio based graphics adapter.
///
/// It can operate in 2D mode and in 3D (virgl) mode.
/// 3D mode will offload rendering ops to the host gpu and therefore requires
/// a gpu with 3D support on the host machine.
/// In 2D mode the virtio-gpu device provides support for ARGB Hardware cursors
/// and multiple scanouts (aka heads).
pub struct VirtIOGpu<H: Hal, T: Transport> {
    transport: T,
    rect: Option<Rect>,
    /// DMA area of frame buffer.
    frame_buffer_dma: Option<Dma<H>>,
    /// DMA area of cursor image buffer.
    cursor_buffer_dma: Option<Dma<H>>,
    /// Queue for sending control commands.
    control_queue: VirtQueue<H, { QUEUE_SIZE as usize }>,
    /// Queue for sending cursor commands.
    cursor_queue: VirtQueue<H, { QUEUE_SIZE as usize }>,
    /// Send buffer for queue.
    queue_buf_send: Box<[u8]>,
    /// Recv buffer for queue.
    queue_buf_recv: Box<[u8]>,
}

impl<H: Hal, T: Transport> VirtIOGpu<H, T> {
    /// Create a new VirtIO-Gpu driver.
    pub fn new(mut transport: T) -> Result<Self> {
        let negotiated_features = transport.begin_init(SUPPORTED_FEATURES);

        // read configuration space
        let config_space = transport.config_space::<Config>()?;
        unsafe {
            let events_read = volread!(config_space, events_read);
            let num_scanouts = volread!(config_space, num_scanouts);
            info!(
                "events_read: {:#x}, num_scanouts: {:#x}",
                events_read, num_scanouts
            );
        }

        let control_queue = VirtQueue::new(
            &mut transport,
            QUEUE_TRANSMIT,
            negotiated_features.contains(Features::RING_INDIRECT_DESC),
            negotiated_features.contains(Features::RING_EVENT_IDX),
        )?;
        let cursor_queue = VirtQueue::new(
            &mut transport,
            QUEUE_CURSOR,
            negotiated_features.contains(Features::RING_INDIRECT_DESC),
            negotiated_features.contains(Features::RING_EVENT_IDX),
        )?;

        let queue_buf_send = FromZeroes::new_box_slice_zeroed(PAGE_SIZE);
        let queue_buf_recv = FromZeroes::new_box_slice_zeroed(PAGE_SIZE);

        transport.finish_init();

        Ok(VirtIOGpu {
            transport,
            frame_buffer_dma: None,
            cursor_buffer_dma: None,
            rect: None,
            control_queue,
            cursor_queue,
            queue_buf_send,
            queue_buf_recv,
        })
    }

    /// Acknowledge interrupt.
    pub fn ack_interrupt(&mut self) -> bool {
        self.transport.ack_interrupt()
    }

    /// Get the resolution (width, height).
    pub fn resolution(&mut self) -> Result<(u32, u32)> {
        let display_info = self.get_display_info()?;
        Ok((display_info.rect.width, display_info.rect.height))
    }

    /// Setup framebuffer
    pub fn setup_framebuffer(&mut self) -> Result<&mut [u8]> {
        // get display info
        let display_info = self.get_display_info()?;
        info!("=> {:?}", display_info);
        self.rect = Some(display_info.rect);

        // create resource 2d
        self.resource_create_2d(
            RESOURCE_ID_FB,
            display_info.rect.width,
            display_info.rect.height,
        )?;

        // alloc continuous pages for the frame buffer
        let size = display_info.rect.width * display_info.rect.height * 4;
        let frame_buffer_dma = Dma::new(pages(size as usize), BufferDirection::DriverToDevice)?;

        // resource_attach_backing
        self.resource_attach_backing(RESOURCE_ID_FB, frame_buffer_dma.paddr() as u64, size)?;

        // map frame buffer to screen
        self.set_scanout(display_info.rect, SCANOUT_ID, RESOURCE_ID_FB)?;

        let buf = unsafe { frame_buffer_dma.raw_slice().as_mut() };
        self.frame_buffer_dma = Some(frame_buffer_dma);
        Ok(buf)
    }

    /// Flush framebuffer to screen.
    pub fn flush(&mut self) -> Result {
        let rect = self.rect.ok_or(Error::NotReady)?;
        // copy data from guest to host
        self.transfer_to_host_2d(rect, 0, RESOURCE_ID_FB)?;
        // flush data to screen
        self.resource_flush(rect, RESOURCE_ID_FB)?;
        Ok(())
    }

    /// Set the pointer shape and position.
    pub fn setup_cursor(
        &mut self,
        cursor_image: &[u8],
        pos_x: u32,
        pos_y: u32,
        hot_x: u32,
        hot_y: u32,
    ) -> Result {
        let size = CURSOR_RECT.width * CURSOR_RECT.height * 4;
        if cursor_image.len() != size as usize {
            return Err(Error::InvalidParam);
        }
        let cursor_buffer_dma = Dma::new(pages(size as usize), BufferDirection::DriverToDevice)?;
        let buf = unsafe { cursor_buffer_dma.raw_slice().as_mut() };
        buf.copy_from_slice(cursor_image);

        self.resource_create_2d(RESOURCE_ID_CURSOR, CURSOR_RECT.width, CURSOR_RECT.height)?;
        self.resource_attach_backing(RESOURCE_ID_CURSOR, cursor_buffer_dma.paddr() as u64, size)?;
        self.transfer_to_host_2d(CURSOR_RECT, 0, RESOURCE_ID_CURSOR)?;
        self.update_cursor(
            RESOURCE_ID_CURSOR,
            SCANOUT_ID,
            pos_x,
            pos_y,
            hot_x,
            hot_y,
            false,
        )?;
        self.cursor_buffer_dma = Some(cursor_buffer_dma);
        Ok(())
    }

    /// Move the pointer without updating the shape.
    pub fn move_cursor(&mut self, pos_x: u32, pos_y: u32) -> Result {
        self.update_cursor(RESOURCE_ID_CURSOR, SCANOUT_ID, pos_x, pos_y, 0, 0, true)?;
        Ok(())
    }

    /// Send a request to the device and block for a response.
    fn request<Req: AsBytes, Rsp: FromBytes>(&mut self, req: Req) -> Result<Rsp> {
        req.write_to_prefix(&mut self.queue_buf_send).unwrap();
        self.control_queue.add_notify_wait_pop(
            &[&self.queue_buf_send],
            &mut [&mut self.queue_buf_recv],
            &mut self.transport,
        )?;
        Ok(Rsp::read_from_prefix(&self.queue_buf_recv).unwrap())
    }

    /// Send a mouse cursor operation request to the device and block for a response.
    fn cursor_request<Req: AsBytes>(&mut self, req: Req) -> Result {
        req.write_to_prefix(&mut self.queue_buf_send).unwrap();
        self.cursor_queue.add_notify_wait_pop(
            &[&self.queue_buf_send],
            &mut [],
            &mut self.transport,
        )?;
        Ok(())
    }

    fn get_display_info(&mut self) -> Result<RespDisplayInfo> {
        let info: RespDisplayInfo =
            self.request(CtrlHeader::with_type(Command::GET_DISPLAY_INFO))?;
        info.header.check_type(Command::OK_DISPLAY_INFO)?;
        Ok(info)
    }

    fn resource_create_2d(&mut self, resource_id: u32, width: u32, height: u32) -> Result {
        let rsp: CtrlHeader = self.request(ResourceCreate2D {
            header: CtrlHeader::with_type(Command::RESOURCE_CREATE_2D),
            resource_id,
            format: Format::B8G8R8A8UNORM,
            width,
            height,
        })?;
        rsp.check_type(Command::OK_NODATA)
    }

    fn set_scanout(&mut self, rect: Rect, scanout_id: u32, resource_id: u32) -> Result {
        let rsp: CtrlHeader = self.request(SetScanout {
            header: CtrlHeader::with_type(Command::SET_SCANOUT),
            rect,
            scanout_id,
            resource_id,
        })?;
        rsp.check_type(Command::OK_NODATA)
    }

    fn resource_flush(&mut self, rect: Rect, resource_id: u32) -> Result {
        let rsp: CtrlHeader = self.request(ResourceFlush {
            header: CtrlHeader::with_type(Command::RESOURCE_FLUSH),
            rect,
            resource_id,
            _padding: 0,
        })?;
        rsp.check_type(Command::OK_NODATA)
    }

    fn transfer_to_host_2d(&mut self, rect: Rect, offset: u64, resource_id: u32) -> Result {
        let rsp: CtrlHeader = self.request(TransferToHost2D {
            header: CtrlHeader::with_type(Command::TRANSFER_TO_HOST_2D),
            rect,
            offset,
            resource_id,
            _padding: 0,
        })?;
        rsp.check_type(Command::OK_NODATA)
    }

    fn resource_attach_backing(&mut self, resource_id: u32, paddr: u64, length: u32) -> Result {
        let rsp: CtrlHeader = self.request(ResourceAttachBacking {
            header: CtrlHeader::with_type(Command::RESOURCE_ATTACH_BACKING),
            resource_id,
            nr_entries: 1,
            addr: paddr,
            length,
            _padding: 0,
        })?;
        rsp.check_type(Command::OK_NODATA)
    }

    fn update_cursor(
        &mut self,
        resource_id: u32,
        scanout_id: u32,
        pos_x: u32,
        pos_y: u32,
        hot_x: u32,
        hot_y: u32,
        is_move: bool,
    ) -> Result {
        self.cursor_request(UpdateCursor {
            header: if is_move {
                CtrlHeader::with_type(Command::MOVE_CURSOR)
            } else {
                CtrlHeader::with_type(Command::UPDATE_CURSOR)
            },
            pos: CursorPos {
                scanout_id,
                x: pos_x,
                y: pos_y,
                _padding: 0,
            },
            resource_id,
            hot_x,
            hot_y,
            _padding: 0,
        })
    }
}

impl<H: Hal, T: Transport> Drop for VirtIOGpu<H, T> {
    fn drop(&mut self) {
        // Clear any pointers pointing to DMA regions, so the device doesn't try to access them
        // after they have been freed.
        self.transport.queue_unset(QUEUE_TRANSMIT);
        self.transport.queue_unset(QUEUE_CURSOR);
    }
}

#[repr(C)]
struct Config {
    /// Signals pending events to the driver。
    events_read: ReadOnly<u32>,

    /// Clears pending events in the device.
    events_clear: WriteOnly<u32>,

    /// Specifies the maximum number of scanouts supported by the device.
    ///
    /// Minimum value is 1, maximum value is 16.
    num_scanouts: Volatile<u32>,
}

/// Display configuration has changed.
const EVENT_DISPLAY: u32 = 1 << 0;

bitflags! {
    #[derive(Copy, Clone, Debug, Default, Eq, PartialEq)]
    struct Features: u64 {
        /// virgl 3D mode is supported.
        const VIRGL                 = 1 << 0;
        /// EDID is supported.
        const EDID                  = 1 << 1;

        // device independent
        const NOTIFY_ON_EMPTY       = 1 << 24; // legacy
        const ANY_LAYOUT            = 1 << 27; // legacy
        const RING_INDIRECT_DESC    = 1 << 28;
        const RING_EVENT_IDX        = 1 << 29;
        const UNUSED                = 1 << 30; // legacy
        const VERSION_1             = 1 << 32; // detect legacy

        // since virtio v1.1
        const ACCESS_PLATFORM       = 1 << 33;
        const RING_PACKED           = 1 << 34;
        const IN_ORDER              = 1 << 35;
        const ORDER_PLATFORM        = 1 << 36;
        const SR_IOV                = 1 << 37;
        const NOTIFICATION_DATA     = 1 << 38;
    }
}

#[repr(transparent)]
#[derive(AsBytes, Clone, Copy, Debug, Eq, PartialEq, FromBytes, FromZeroes)]
struct Command(u32);

impl Command {
    const GET_DISPLAY_INFO: Command = Command(0x100);
    const RESOURCE_CREATE_2D: Command = Command(0x101);
    const RESOURCE_UNREF: Command = Command(0x102);
    const SET_SCANOUT: Command = Command(0x103);
    const RESOURCE_FLUSH: Command = Command(0x104);
    const TRANSFER_TO_HOST_2D: Command = Command(0x105);
    const RESOURCE_ATTACH_BACKING: Command = Command(0x106);
    const RESOURCE_DETACH_BACKING: Command = Command(0x107);
    const GET_CAPSET_INFO: Command = Command(0x108);
    const GET_CAPSET: Command = Command(0x109);
    const GET_EDID: Command = Command(0x10a);

    const UPDATE_CURSOR: Command = Command(0x300);
    const MOVE_CURSOR: Command = Command(0x301);

    const OK_NODATA: Command = Command(0x1100);
    const OK_DISPLAY_INFO: Command = Command(0x1101);
    const OK_CAPSET_INFO: Command = Command(0x1102);
    const OK_CAPSET: Command = Command(0x1103);
    const OK_EDID: Command = Command(0x1104);

    const ERR_UNSPEC: Command = Command(0x1200);
    const ERR_OUT_OF_MEMORY: Command = Command(0x1201);
    const ERR_INVALID_SCANOUT_ID: Command = Command(0x1202);
}

const GPU_FLAG_FENCE: u32 = 1 << 0;

#[repr(C)]
#[derive(AsBytes, Debug, Clone, Copy, FromBytes, FromZeroes)]
struct CtrlHeader {
    hdr_type: Command,
    flags: u32,
    fence_id: u64,
    ctx_id: u32,
    _padding: u32,
}

impl CtrlHeader {
    fn with_type(hdr_type: Command) -> CtrlHeader {
        CtrlHeader {
            hdr_type,
            flags: 0,
            fence_id: 0,
            ctx_id: 0,
            _padding: 0,
        }
    }

    /// Return error if the type is not same as expected.
    fn check_type(&self, expected: Command) -> Result {
        if self.hdr_type == expected {
            Ok(())
        } else {
            Err(Error::IoError)
        }
    }
}

#[repr(C)]
#[derive(AsBytes, Debug, Copy, Clone, Default, FromBytes, FromZeroes)]
struct Rect {
    x: u32,
    y: u32,
    width: u32,
    height: u32,
}

#[repr(C)]
#[derive(Debug, FromBytes, FromZeroes)]
struct RespDisplayInfo {
    header: CtrlHeader,
    rect: Rect,
    enabled: u32,
    flags: u32,
}

#[repr(C)]
#[derive(AsBytes, Debug)]
struct ResourceCreate2D {
    header: CtrlHeader,
    resource_id: u32,
    format: Format,
    width: u32,
    height: u32,
}

#[repr(u32)]
#[derive(AsBytes, Debug)]
enum Format {
    B8G8R8A8UNORM = 1,
}

#[repr(C)]
#[derive(AsBytes, Debug)]
struct ResourceAttachBacking {
    header: CtrlHeader,
    resource_id: u32,
    nr_entries: u32, // always 1
    addr: u64,
    length: u32,
    _padding: u32,
}

#[repr(C)]
#[derive(AsBytes, Debug)]
struct SetScanout {
    header: CtrlHeader,
    rect: Rect,
    scanout_id: u32,
    resource_id: u32,
}

#[repr(C)]
#[derive(AsBytes, Debug)]
struct TransferToHost2D {
    header: CtrlHeader,
    rect: Rect,
    offset: u64,
    resource_id: u32,
    _padding: u32,
}

#[repr(C)]
#[derive(AsBytes, Debug)]
struct ResourceFlush {
    header: CtrlHeader,
    rect: Rect,
    resource_id: u32,
    _padding: u32,
}

#[repr(C)]
#[derive(AsBytes, Debug, Clone, Copy)]
struct CursorPos {
    scanout_id: u32,
    x: u32,
    y: u32,
    _padding: u32,
}

#[repr(C)]
#[derive(AsBytes, Debug, Clone, Copy)]
struct UpdateCursor {
    header: CtrlHeader,
    pos: CursorPos,
    resource_id: u32,
    hot_x: u32,
    hot_y: u32,
    _padding: u32,
}

const QUEUE_TRANSMIT: u16 = 0;
const QUEUE_CURSOR: u16 = 1;

const SCANOUT_ID: u32 = 0;
const RESOURCE_ID_FB: u32 = 0xbabe;
const RESOURCE_ID_CURSOR: u32 = 0xdade;

const CURSOR_RECT: Rect = Rect {
    x: 0,
    y: 0,
    width: 64,
    height: 64,
};
virtio_drivers/device/gpu.rs

virtio_drivers/device/
gpu.rs
