//! # embedded-sdmmc
//!
//! > An SD/MMC Library written in Embedded Rust
//!
//! This crate is intended to allow you to read/write files on a FAT formatted
//! SD card on your Rust Embedded device, as easily as using the `SdFat` Arduino
//! library. It is written in pure-Rust, is `#![no_std]` and does not use
//! `alloc` or `collections` to keep the memory footprint low. In the first
//! instance it is designed for readability and simplicity over performance.
//!
//! ## Using the crate
//!
//! You will need something that implements the `BlockDevice` trait, which can
//! read and write the 512-byte blocks (or sectors) from your card. If you were
//! to implement this over USB Mass Storage, there's no reason this crate
//! couldn't work with a USB Thumb Drive, but we only supply a `BlockDevice`
//! suitable for reading SD and SDHC cards over SPI.
//!
//! ## Features
//!
//! * `log`: Enabled by default. Generates log messages using the `log` crate.
//! * `defmt-log`: By turning off the default features and enabling the
//! `defmt-log` feature you can configure this crate to log messages over defmt
//! instead.
//!
//! You cannot enable both the `log` feature and the `defmt-log` feature.

#![cfg_attr(not(test), no_std)]
#![feature(async_fn_in_trait)]
#![deny(missing_docs)]

// ****************************************************************************
//
// Imports
//
// ****************************************************************************

#[cfg(test)]
#[macro_use]
extern crate hex_literal;

#[macro_use]
mod structure;

pub mod blockdevice;
pub mod fat;
pub mod filesystem;

#[doc(inline)]
pub use crate::blockdevice::{Block, BlockCount, BlockDevice, BlockIdx};

#[doc(inline)]
pub use crate::fat::FatVolume;

#[doc(inline)]
pub use crate::filesystem::{
    Attributes, ClusterId, DirEntry, Directory, File, FilenameError, Mode, ShortFileName,
    TimeSource, Timestamp, MAX_FILE_SIZE,
};

use filesystem::DirectoryInfo;

mod volume;
#[doc(inline)]
pub use volume::Volume;

#[cfg(all(feature = "defmt-log", feature = "log"))]
compile_error!("Cannot enable both log and defmt-log");

#[cfg(feature = "log")]
use log::{debug, trace, warn};

#[cfg(feature = "defmt-log")]
use defmt::{debug, trace, warn};

#[cfg(all(not(feature = "defmt-log"), not(feature = "log")))]
#[macro_export]
/// Like log::debug! but does nothing at all
macro_rules! debug {
    ($($arg:tt)+) => {};
}

#[cfg(all(not(feature = "defmt-log"), not(feature = "log")))]
#[macro_export]
/// Like log::trace! but does nothing at all
macro_rules! trace {
    ($($arg:tt)+) => {};
}

#[cfg(all(not(feature = "defmt-log"), not(feature = "log")))]
#[macro_export]
/// Like log::warn! but does nothing at all
macro_rules! warn {
    ($($arg:tt)+) => {};
}

// ****************************************************************************
//
// Public Types
//
// ****************************************************************************

/// Represents all the ways the functions in this crate can fail.
#[cfg_attr(feature = "defmt-log", derive(defmt::Format))]
#[derive(Debug, Clone)]
pub enum Error<E>
where
    E: core::fmt::Debug,
{
    /// The underlying block device threw an error.
    DeviceError(E),
    /// The filesystem is badly formatted (or this code is buggy).
    FormatError(&'static str),
    /// The given `VolumeIdx` was bad,
    NoSuchVolume,
    /// The given filename was bad
    FilenameError(FilenameError),
    /// Out of memory opening volumes
    TooManyOpenVolumes,
    /// Out of memory opening directories
    TooManyOpenDirs,
    /// Out of memory opening files
    TooManyOpenFiles,
    /// Bad handle given
    BadHandle,
    /// That file doesn't exist
    FileNotFound,
    /// You can't open a file twice or delete an open file
    FileAlreadyOpen,
    /// You can't open a directory twice
    DirAlreadyOpen,
    /// You can't open a directory as a file
    OpenedDirAsFile,
    /// You can't open a file as a directory
    OpenedFileAsDir,
    /// You can't delete a directory as a file
    DeleteDirAsFile,
    /// You can't close a volume with open files or directories
    VolumeStillInUse,
    /// You can't open a volume twice
    VolumeAlreadyOpen,
    /// We can't do that yet
    Unsupported,
    /// Tried to read beyond end of file
    EndOfFile,
    /// Found a bad cluster
    BadCluster,
    /// Error while converting types
    ConversionError,
    /// The device does not have enough space for the operation
    NotEnoughSpace,
    /// Cluster was not properly allocated by the library
    AllocationError,
    /// Jumped to free space during FAT traversing
    UnterminatedFatChain,
    /// Tried to open Read-Only file with write mode
    ReadOnly,
    /// Tried to create an existing file
    FileAlreadyExists,
    /// Bad block size - only 512 byte blocks supported
    BadBlockSize(u16),
    /// Bad offset given when seeking
    InvalidOffset,
}

impl<E> From<E> for Error<E>
where
    E: core::fmt::Debug,
{
    fn from(value: E) -> Error<E> {
        Error::DeviceError(value)
    }
}

/// This enum holds the data for the various different types of filesystems we
/// support.
#[cfg_attr(feature = "defmt-log", derive(defmt::Format))]
#[derive(Debug, PartialEq, Eq)]
pub enum VolumeType {
    /// FAT16/FAT32 formatted volumes.
    Fat(FatVolume),
}

// ****************************************************************************
//
// Unit Tests
//
// ****************************************************************************

// None